Product Specifications:

Item	Description
Current	200A Continuous Current	Current control is similar to wave-by-wave current limiting which  effectively limit peak current to avoid motor damage.
Power supply	3~8S LiPo	When using DC power supply instead of pure battery supply, its discharge  and the power recovery capability must be considered. If the power supply  capacity is limited, the operating parameters  (such as acceleration and corresponding braking options, etc.)  can be appropriately modulated.
Recommended motor	Sensor or sensorless square wave control  of brushless motors
Motor speed	When the number of pole pairs is 1, the electrical speed is exactly equal to the mechanical speed. Others: Electrical speed = Mechanical speed × Number of pole pairs = KV value × Bus voltage × Number of pole pairs Note: max electric speed 240,000rpm.	Speed of the motor is very high when idling. Stay safe.
BEC	Voltage: 6.0V/7.4V/8.4V,  it can be switched through the mobile APP. Current: 8A continuously, 25A short-term
Fan	Temperature> 55?, power supply to the fan turns on. Temperature < 50?,power supply to the fan turns off. When there is a large current abnormality,  the controller turns off the fan power supply	1. The fan powered by BEC 2. When a short-circuit current occurs to the fan,  the power will be cut off. Power recovered in 1 second
Bluetooth	1. All parameters of the ESC can be adjusted by using  the mobile APP 2. The ESC firmware can be upgraded by using the mobile APP 3.Motor operation data observation: data log and real-time data.
Dimension	69.20(L)*56.80(W)*42.30(H)mm / ˜216g (with wire)

_____________________________________________________________________________________________________________________________________________

Features:

2.1    Meticulously proved commutation scheme, smooth commutation even in noninductive.

2.2    Active freewheeling technology can reduce MOS heating while avoiding excessive current pulses.

2.3    Current limiting in each PWM cycle reduces the impact of pulse current on the motor.

2.4    Intelligent heat dissipation ensures the fan operates silently at low temperatures.

2.5    Built-in Bluetooth connections to mobile APP for hardware management and parameters setting.

2.6    Mobile APP data observation interface for viewing ESC recording data (static data) and real-time debugging data.

2.7    High-power DC conversion circuit makes BEC a potent loading capacity.

2.8    Full protection: low voltage, over voltage, throttle loss, abnormal braking, over temperature etc.

2.9    Turbo timing available.

2.10  No need to buy additional modules, you have a READY-TO-RUN speed controller.

2.11  Supporting XC BUS protocol, real-time control of ESC and reading of operation data through Bus. It can be used for robot control or other automated programming control.