Shopping Bag

0 item(s) in cart/ total: $0    view cart
CAR X 60A Sensored ESC 2-3S
CAR X 60A Sensored ESC 2-3S

CAR X 60A Sensored ESC 2-3S

review
0
0
5
Your Price: $39.95
In Stock.
Part Number:X-60A
Attention!
ESC does not have any Motor connectors.
User will need to solder on Motor connectors of their choice if not direct to motor solder.
The customer takes the risk to purchase and do the solder job for connector install.
All ESC are powered up before shipping to confirm fan is spinning and is working properly.
XT60 Connector Pre Installed

For sensored / sensorless brushless motor.
Can be compatible with brushless motors of LRP, NOVAK, SPEEDPASSIO, FEIGAO.
The sensorless one can be compatible with all types of brushless motors. 

Model:                        X-60A

Weight:                       60 g

Size:                           44 x37 x33 mm

Constant Current:       60A

SBEC:                         YES,3A

PWM:                          24 KHz

Input:                           2 to 3 Li-Po, or 4 to10 Ni-MH/Ni-Cd

Throttle Calibration Procedeure

1. While you are holding the red button on the switch of the ESC, turn on the ESC.
When it turns on, while still holding the red button down, red LED should flash, let go of red button.
(Don't hold down red button longer than 3 seconds because it will restore ESC settings to default instead of go into calibration mode) 
2. Now, leave the throttle in neutral position on the transmitter and hit the red button once. The ESC will flash green once.
3. Now, hold full throttle and press the red button again. The ESC will blink green twice.
4. Lastly, Hold full reverse and hit the red button one last time. The ESC will blink green three times.
The ESC will then be calibrated.

Reward Points

40 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items

Earn Rewards!