ESC does not have any connectors. User will need to solder on connectors of their choice.
For sensored / sensorless brushless motor.
Can be compatible with brushless motors of LRP, NOVAK, SPEEDPASSIO, FEIGAO.
The sensorless one can be compatible with all types of brushless motors.
Model: X-120
Weight: 63 g
Size: 44 x37 x33 mm
Constant Current: 120A
Pulsed Current: 450A
SBEC: 3A
PWM: 24 KHz
Input: 2 to 3 Li-Po, or 4 to10 Ni-MH/Ni-Cd
Throttle Calibration Procedeure
1. While you are holding the red button on the switch of the ESC, turn on the ESC.
When it turns on, while still holding the red button down, red LED should flash, let go of red button.
(Don't hold down red button longer than 3 seconds because it will restore ESC settings to default instead of go into calibration mode)
2. Now, leave the throttle in neutral position on the transmitter and hit the red button once. The ESC will flash green once.
3. Now, hold full throttle and press the red button again. The ESC will blink green twice.
4. Lastly, Hold full reverse and hit the red button one last time. The ESC will blink green three times.
The ESC will then be calibrated.