Hobao 1/10 HYPER SC 2.0 SHORT COURSE TRUCK ARR

STANDARD PARTS
OPTIONAL PARTS 
MANUAL
EXPLODED VIEW

[FEATURES]

All Metal Parts CNC Machined.
Body: 

•   ARR: Clear body.
  
•   RTR: Painted body.
  

Chassis: Lightweight, Hard anodized CNC aluminum, 3mm thick.

Center Top Brace

• Wire pass through.
• Quick Release    
  

 
Drive:

• Central: Single Ø4mm Hardened steel center driveshaft.
  -. Optional  Aluminum center driveshaft #OP1-0083 
• Front wheel: CVA axles, Ø3.2mm Hardened steel.
• Rear wheel: Dogbone axles, Ø3.4mm Hardened steel.
  -. Optional rear wheel CVA axles #OP1-0082

Differentials:

• Center differential is directly connected to rear differential.
• Front, Rear and Center Differential, Metal Bevel gear, Anti-leakage Differential housing.
• Pinion Gear: 10T (MOD 1)/ Ring Gear: 39T (MOD 1)
• Center Spur Gear: 40T (MOD 1)
• Motor Gear: 13T (MOD 1)
• Front differential filled with #20K silicone oil.
• Center differential filled with #9K silicone oil.
• Rear differential filled with #5K silicone oil.
  

Shocks:

• Filled with front #700 silicone oil and rear #600 silicone oil.
• Alum 12mm Big Body, 3.5mm Shaft, Alum Adjustable Ring, Shock Cap Protector.
• Spring:
  -. Front: 0.86kg/cm, L=50mm, Blue
  -. Rear: 064kg/cm, L=65mm, Blue
  -. Optional Front Spring#OP1-0073: 1kg/cm, L=50mm, Grey
  -. Optional Rear Spring #OP1-0074: 0.73kg/cm, L=65mm, Grey
  -. Shock Tower: 3mm CNC alum
  -. Optional carbon fiber shock tower, Front tower #OP1-0070 & Rear tower #OP1-0071

Suspension:

• Front PBS
• New design steering block with enlarged pivot ball and alum steering arms.
• Optional alum steering block set #OP1-0077; Alum rear hub #OP1-0079.
• New strengthened composite upper arms and lower arms.( Also Fitting for older versions of the Hyper 10SC)
• Optional carbon fiber arm insert#OP1-0068 and #OP1-0069
  
• Front & rear anti-roll bars.
• New Alum front and rear arm holder.
• Front and rear CNC alum arm holder with pill inserts#11367, adjustable toe angles and anti-squat angles.

Steering:

• New Steering Crank set with Strengthen CNC Alum steering rack and hard spring.
• Ball bearing equipped with servo saver

Strengthen center body shell frame:

Battery tray:

Motor Mount:

• CNC alum laydown motor mount
• Fitting for motors with size below 38mm
• Spur gear cover
  

Tires: 2.2?/3.0? Short Course Tires.

Wheel Hex Hub:

• Front 12mm wheel hex hubs , Plastic
• Rear 12mm wheel hex hubs, +1mm , Plastic
• Optional Front wheel hex hubs#OP1-0075; Rear wheel hex hubs #OP1-0076
  

Wheels:

• 2.2?/3.0?, 12mm #40127
• Optional 5-Spoke Wheels. #11034

Ball Bearings: Full set included
Caster: Adjustable.
Camber: Adjustable.

[SPECIFICATIONS]

[REQUIREMENTS]

• Radio 2 channel
• ESC & Motor
• High-torque steering servo
• Glue for tire
• Paint for body