Simple Brine Shrimp Incubator Kit
1. Fill water to the standard water level line in the incubator tube and add about 10g of coarse salt to dissolve in advance.
2. Connect the air pump to the air inlet hole at the bottom of the incubator to adjust the air volume add the air valve in between.
3. Collection operation: After hatching of the brine shrimp eggs, stop pumping and let stand for about 10 to 15 minutes. When the hatched shrimps sink to the bottom and the shrimp shells float up, open air valve at the bottom of the incubator to collect the brine larvae.
4. Uneaten brine shrimp larvae should be stored in the refrigerator freezing.
Does not include the air pump needed to operate.
1x Brine Shrimp Incubator Kit
Air tube, air valve, brine shrimp incubator, and base.
The hatching cylinder is 4.6cm diameter and the total height is 28cm.