RC4GS V2
400 Meters Ground Distance
With the same FHSS spread spectrum of AT9S and 67 channels, pseudo-random frequency hopping makes RC4GS V2 have the superior anti-interference ability both at the same frequency band and different frequency bands.
Real-time Telemetry of Model Battery Voltage
Note: The model battery voltage telemetry function has to use receiver R7FG or R8F.
Telemetry is capable of RSSI, receiver, and model battery voltage.
RSSI and receiver voltage data will display once binding complete.
The model voltage will display by connecting the wire to the ESC, battery, and Telemetry port of receiver R7FG/R8F, no extra module needed.
Telemetry of maximum 8S battery supported.
4 Channels for Multiple Types of Models
RC4GS V2 is an ideal partner for all types RC cars and boats in the market including single-engine and twin-engine models such as Crawlers, Tanks, Caterpillars, Basher, RC Short-Course Truck, RC Crawler, Drifting RC Car, Gasoline RC Car, Mini RC Car, RC Monster Truck, Off-Road RC Car, GP RC Car, EP RC Car and other types of RC cars or boats.
Receiver with Gyro Integrated
Standard receiver R6FG packed is the receiver with built-in gyro and supports high voltage servo.
It is anti-slip and keeps the uni-direction.
With the integrated gyro in R6FG installed, the vehicle turns more smoothly, and drifting from high speed can be prevented.
Customizable Gyro Sensitivity
The easy setting ensures better control of gyro stabilization.
Gyro sensitivity can be adjusted by STD or CH3 which is controlled by VR switch by default to maximize or minimize the gyro function.
Onboard Memory for 10 Models
RC4GS V2 can keep a maximum of 10 pcs model parameters saved.
Reverse Polarity Protection Circuit
RC4GS V2 is easily adapted for various battery layouts with wide operating voltage tolerance: 6pcs of AA batteries, a 2S-4S LiPo or 18650 Lithium battery.
Universal JST connector with the voltage protection software of Radiolink ensures vital components are protected from a reverse polarity connection.
Dimension of battery case: 89*59*25mm (3.5” *2.32” *0.98”)
Pay attention: if you use a 18650 Lithium to power for RC4GS V2, please make sure the 18650 Lithium is with a JST connector and the dimension of the battery case is 89*59*25mm (3.5” *2.32” *0.98”).
USB Upgrade
The RC4GS V2 is easily updating by the computer via a USB cable.
Intuitive software hint guides you through the process.
Note: The USB port only for upgrade, do not use it for charge.
Compatible Receivers
Standard receiver R6FG packed is a 6 channels receiver with built-in gyro and high voltage servo support.
4 channels mini receivers R4FGM/R4F designed for Mini RC cars.
7 channels dual antenna, with built-in gyro, high voltage servo support, and model voltage telemetry support receiver.
8 channels long control distance receivers R8EF/R8F, which designed for RC boats.
