| Item | Description | |
| Current | 200A Continuous Current | Current control is similar to wave-by-wave current limiting which effectively limit peak current to avoid motor damage. |
| Power supply | 3~8S LiPo | When using DC power supply instead of pure battery supply, its discharge and the power recovery capability must be considered. If the power supply capacity is limited, the operating parameters (such as acceleration and corresponding braking options, etc.) can be appropriately modulated. |
| Recommended motor | Sensor or sensorless square wave control of brushless motors | |
| Motor speed | When the number of pole pairs is 1, the electrical speed is exactly equal to the mechanical speed. Others: Electrical speed = Mechanical speed × Number of pole pairs = KV value × Bus voltage × Number of pole pairs Note: max electric speed 240,000rpm. | Speed of the motor is very high when idling. Stay safe. |
| BEC | Voltage: 6.0V/7.4V/8.4V, it can be switched through the mobile APP. Current: 8A continuously, 25A short-term | |
| Fan | Temperature> 55?, power supply to the fan turns on. Temperature < 50?,power supply to the fan turns off. When there is a large current abnormality, the controller turns off the fan power supply | 1. The fan powered by BEC 2. When a short-circuit current occurs to the fan, the power will be cut off. Power recovered in 1 second |
| Bluetooth | 1. All parameters of the ESC can be adjusted by using the mobile APP 2. The ESC firmware can be upgraded by using the mobile APP 3.Motor operation data observation: data log and real-time data. | |
| Dimension | 69.20(L)*56.80(W)*42.30(H)mm / ˜216g (with wire) |
_____________________________________________________________________________________________________________________________________________
2.1 Meticulously proved commutation scheme, smooth commutation even in noninductive.
2.2 Active freewheeling technology can reduce MOS heating while avoiding excessive current pulses.
2.3 Current limiting in each PWM cycle reduces the impact of pulse current on the motor.
2.4 Intelligent heat dissipation ensures the fan operates silently at low temperatures.
2.5 Built-in Bluetooth connections to mobile APP for hardware management and parameters setting.
2.6 Mobile APP data observation interface for viewing ESC recording data (static data) and real-time debugging data.
2.7 High-power DC conversion circuit makes BEC a potent loading capacity.
2.8 Full protection: low voltage, over voltage, throttle loss, abnormal braking, over temperature etc.
2.9 Turbo timing available.
2.10 No need to buy additional modules, you have a READY-TO-RUN speed controller.
2.11 Supporting XC BUS protocol, real-time control of ESC and reading of operation data through Bus. It can be used for robot control or other automated programming control.