| Item | Description | |
| Current | 250A Continuous Current | Current control is similar to wave-by-wave current limiting which effectively limit peak current to avoid motor damage. |
| Power supply | 6~12S LiPo | When using DC power supply instead of pure battery supply, its discharge and the power recovery capability must be considered. If the power supply capacity is limited, the operating parameters (such as acceleration and corresponding braking options, etc.) can be appropriately modulated. |
| Recommended motor | Sensor or sensorless square wave control of brushless motors | |
| Motor speed | When the number of pole pairs is 1, the electrical speed is exactly equal to the mechanical speed. Others: Electrical speed = Mechanical speed × Number of pole pairs = KV value × Bus voltage × Number of pole pairs Note: max electric speed 240,000rpm. | Speed of the motor is very high when idling. Stay safe. |
| BEC | Voltage: 6.0V/7.4V/8.4V, it can be switched through the mobile APP. Current: 8A continuously, 25A short-term | |
| Fan | Temperature> 55?, power supply to the fan turns on. Temperature < 50?,power supply to the fan turns off. When there is a large current abnormality, the controller turns off the fan power supply | 1. The fan powered by BEC 2. When a short-circuit current occurs to the fan, the power will be cut off. Power recovered in 1 second |
| Bluetooth | 1. All parameters of the ESC can be adjusted by using the mobile APP 2. The ESC firmware can be upgraded by using the mobile APP 3.Motor operation data observation: data log and real-time data. | |
| Dimension | 93.80(L)*59.00(W)*53.60(H)mm / ˜ 470g (with wire) |