Warning!!! Do not use our wheels unless your car is already tuned to go straight down the lane like a real drag race car does.
If your car is tuned to go straight down the lane then will have no problem using these wheels and tires.
If your car is not tuned correct and goes down the lane swerving from right to left at high speeds there is a good chance the tires will rip off the wheels.
These wheel and tire set ups are designed for cars that are already tuned to go straight down the lane with no swerving at high speeds.
Custom 1/10 LRC Spyder Front Drag Wheels
Use for 1/10 scale models.
Made from Billet 7075 Aluminum.
12mm Hex.
Width 10mm
Anodized colors available.
Customers have had good results with Proline, BSI Maxi Cure, BSI Insta-Flex+, Gorilla Glue Clear, Realth Windshield Adhesive & Sealant and Permatex Ultra Black RTV Silicone adhesives.
Allow 24 hours for glue to cure.
Wheels come in two different types. One type uses an oring the other type uses Traxxas 6971.
The oring type wheels come with orings preglued.
The Traxxas 6971 tire type wheels do not include the tires and will need to purchase separately.
Leave comment for color of tires to include.
Black, neon green, green, red, glow in dark green, glow in dark red, glow in dark orange
Leave comment for size O Ring 66mm OD or low profile 60mm OD.
ID: 45mm
OD: 66mm
Width: 10mm
ID: 45mm
OD: 60mm
Width: 10mm
Includes:
2x 1/10 LRC Spyder 12mm Hex Front Drag Wheels
2x O ring tires ( Only for O ring type tire wheels )